Detailed Product Description

K Series Filters

1. K3MFC2010F : NSF42 listed. Sediment + GAC

2. K32010CB : NSF42 listed, 5 micron carbon block

3. K2010COCO : NSF component, GAC(Granular Activated Carbon) 100%

4. K2010GP : GAC + polyphosphate(scale inhibitor)

5. K2010Sediment : 5 micron sediment

Features

System tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of Chlorine, Taste and Odor and Particulate Class I

Operating conditions

Flow rate : 0.5 GPM(1.9LPM)
Pressure : 30 - 100 PSI (207-689kPa)
Temperature : 34-100 F (1-38 °C)
Service life : 6 Months
Capacity : 530 to 1,500 Gallons according to filter midea 
Function : Chemical/Mechanical Reduction
Flushing : 5 Minutes

Operating Notices

1. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.
2. For cold water only.
3. Replace whole filter for every 6 months
4. The testing was performed under standard laboratory conditions, actual performance may vary.
5. Check for compliance with the state and local laws and regulations.
6. Systems must be installed and operated in accordance with manufacturer's recommended procedures and guidelines.